Pricing by neighborhood — Electrician · Fort Worth, TX
| Neighborhood | Low | High | Why the price moves |
|---|---|---|---|
| Westover Hills / Rivercrest / Westcliff | $90 | $145 | Premium estates, 400A services, whole-home Generac and Kohler integration, EV-charger and pool-equipment scope, town-specific permitting in Westover Hills on top of Fort Worth filings |
| Cultural District / TCU / Park Hill | $80 | $130 | Premium historic plus newer custom, panel upgrades and 1920s-30s rewires, university-rental quick-turn work mixed with high-end remodels |
| Fairmount / Ryan Place / Mistletoe Heights | $75 | $120 | 1910s-30s craftsman and bungalow, knob-and-tube and cloth-wire remnants, 60-100A panel upgrades, historic-district plaster-wall fishing |
| Arlington Heights / Crestwood / Monticello | $70 | $110 | Mid-tier 1930s-50s stock, mix of original and updated panels, frequent FPE and Zinsco replacement |
| Stockyards / North Side / Diamond Hill | $60 | $95 | Older working-class single-family, value-tier pricing, smaller-scope service calls, dedicated-circuit and outlet work |
| Southside / Near Southside / Berry | $65 | $105 | Gentrifying corridors, mid-century retrofits, ADU sub-panels and remodel work, growing EV-charger volume |
| Keller / Southlake / Trophy Club / Colleyville | $80 | $130 | North wealthy suburb, 2000s-2020s new construction, 200-400A EV-ready services, Powerwall and standby-generator installs, town-specific permitting |
| Burleson / Crowley / Forest Hill | $60 | $95 | South suburban budget, 1980s-2000s tract, 100-150A panels, EV-charger and aluminum-wiring remediation common |
Electrician hourly rate by neighborhood in Fort Worth, TX. Ranges reflect typical contractor pricing including travel time, building-type access, and local labor density.
How much does an electrician cost in Fort Worth?
Fort Worth electricians charge $60-$105 per hour for scheduled work, with an average of $80/hr. Emergency calls (nights, weekends, post-storm peak) run $120-$170/hr plus a $100-$175 trip charge. Neighborhood matters: Westover Hills, Rivercrest, and Westcliff estate work sits at the top of the range because of 400A services, whole-home generator integration, and town-specific permitting on top of Fort Worth filings. Stockyards, North Side, and Burleson tract housing sit at the bottom.
The Bureau of Labor Statistics reports the median hourly wage for electricians in the Dallas-Fort Worth-Arlington metro at $31.20. The gap between that and the $80/hr you actually pay is real and explainable, and the rest of this article walks through where every dollar goes, what permits the City of Fort Worth and Oncor require, and what to ask when comparing quotes.
Fort Worth Electrician Rates by Neighborhood
Fort Worth is not one electrical market. A Westover Hills custom with a 400A service, a 22kW Generac, and three sub-panels is a different job than a 1958 Crestwood ranch with a single 100A panel and one new EV-charger circuit. The full per-neighborhood breakdown sits at the top of this page; this section explains the why.
Westover Hills runs its own town inspection office on top of Tarrant County, which adds 3-7 days to permit timelines and requires a separately registered contractor. Keller, Southlake, Trophy Club, and Colleyville similarly maintain their own permit offices and approved-contractor lists. Fairmount and Ryan Place sit inside the City of Fort Worth historic-district overlay, which adds preservation review on any visible exterior electrical work. Stockyards, North Side, and Burleson skip most of that overhead and run at higher daily volume per truck.
Comparable cities for cross-reference:
- Dallas electrician costs — $65-$115/hr
- Houston electrician costs — $65-$115/hr
- San Antonio electrician costs — $60-$105/hr
- Phoenix electrician costs — $70-$120/hr
Fort Worth sits roughly 5-10% below Dallas because of lower overhead and shorter travel inside city limits, and a few dollars below Houston for similar reasons. Sun Belt panel-upgrade and EV-charger scope dominates the work mix across all four metros.
Fort Worth Electrician Pricing by Building Type
Neighborhood is one axis. Building type is the other, and it often matters more. A 1924 Fairmount craftsman with knob-and-tube remnants, a 1982 Wedgwood two-story with aluminum branch wiring, and a 2020 Trophy Club custom with a 200A EV-ready service behave very differently once the panel cover comes off.
| Building type | Hourly rate | Why the price moves |
|---|---|---|
| 1910s-30s craftsman and bungalow (Fairmount, Ryan Place, Mistletoe Heights) | $80-$125 | Knob-and-tube and cloth-wire remnants, 60-100A panels needing 200A upgrade, plaster-wall fishing, historic-district review |
| 1940s-60s ranch (Arlington Heights, Crestwood, Wedgwood) | $70-$110 | Slab construction, original 100A panels, FPE or Zinsco replacement common |
| 1970s-80s tract (Hulen, Wedgwood, parts of Arlington and Watauga) | $70-$115 | Aluminum branch-wiring remediation, 100-150A panels, EV and Powerwall additions |
| 1990s-2000s tract (south Fort Worth, Burleson, Crowley, Forest Hill) | $65-$105 | 150-200A service standard, copper branch wiring, EV and pool-equipment circuits |
| New construction (Keller, Southlake, Trophy Club, Colleyville, Alliance) | $75-$120 | 200-400A EV-ready service standard, multi-subpanel, smart-panel and Powerwall scope, town permitting |
| Luxury custom (Westover Hills, Rivercrest, Westcliff) | $95-$150 | 400A service, multi-subpanel, whole-home Generac and ATS, ADU sub-panels, pool and outdoor-kitchen scope |
The aluminum branch-wiring callout deserves attention. Tens of thousands of 1970s and early-1980s Fort Worth tract homes (Wedgwood, Hulen, parts of Arlington and Watauga) were built with aluminum branch circuits, now a known fire risk that most insurance carriers will not cover without remediation. Accepted fixes are CO/ALR-rated devices on every termination or copper pigtails (AlumiConn or COPALUM) at every box. A typical 3-bedroom remediation runs $2,500-$8,000 depending on access, and the issue gets flagged on almost every resale inspection in those neighborhoods.
What Your Billed Hour Actually Covers
The $31.20 BLS wage is take-home pay for the electrician, not what the customer pays. The customer rate of $60-$105/hr covers everything the business needs to legally operate in Fort Worth and the surrounding municipalities.
Roughly: 50% labor, 12% commercial liability and bonding insurance ($12,000-$22,000/yr per crew because panel and generator work carry higher claim rates), 11% vehicle and specialty tools (commercial van, megohmmeter, thermal imaging camera, conduit bender, EV-charger and generator commissioning kits), 10% Texas licensing and overhead (TDLR renewals, continuing education, commercial truck registration, City of Fort Worth contractor registration, dispatch), and 17% contractor profit. Strip any of those out and the business cannot stay open.
This is why the cheapest quote is not always the right one. An electrician bidding $38/hr is either uninsured, unlicensed (City of Fort Worth inspectors will not sign off and Oncor will not approve the meter swap), or losing money and about to disappear mid-project.
Fort Worth Electrical Permits and What They Cost
The City of Fort Worth Development Services Department handles electrical permits inside city limits, and Oncor coordinates separately on anything that touches the meter or service drop. Tarrant County issues permits for unincorporated areas. Westover Hills, Keller, Southlake, Trophy Club, Colleyville, Burleson, and Crowley all operate separate offices with similar but not identical fee schedules. Skipping the permit is the most common way homeowners turn a $2,200 job into a $6,500 resale problem when the buyer’s inspector flags unpermitted work.
| Work | Permit | Typical cost | Lead time |
|---|---|---|---|
| Outlet, switch, or fixture additions | Fort Worth Express Electrical | $75-$180 | 1-3 days |
| Panel upgrade (100A to 200A) | Fort Worth Service Upgrade + Oncor | $180-$450 | 2-5 weeks |
| EV-charger circuit (Level 2) | Fort Worth Electrical | $75-$180 | 1-5 days |
| Standby generator + transfer switch | Fort Worth Electrical + gas permit | $225-$550 | 2-4 weeks |
| Solar / Powerwall interconnect | Fort Worth Electrical + Oncor interconnect | $275-$650 | 4-10 weeks |
| Whole-house rewire / aluminum remediation | Fort Worth Electrical (plan check) | $350-$900 | 3-6 weeks |
Your electrician files the permit and the fee gets added to the invoice. Suburban municipalities sometimes require an additional contractor registration on top of the TDLR license; Westover Hills, Keller, Southlake, Trophy Club, and Colleyville all maintain their own approved-contractor lists and may reject a permit from an electrician who has not registered locally. Oncor coordination on service upgrades, generator interconnect, and solar tie-ins is the slow path: the contractor cannot energize the new service until Oncor swaps the meter, and that timeline is set by the utility’s queue.
For larger renovations, coordinate the electrical permit with a Fort Worth HVAC technician on AC condenser circuits and with a Fort Worth plumber on tankless or pool-equipment work, often filed as a single combination permit.
Common Electrical Job Pricing in Fort Worth
Typical all-in prices, including labor, parts, City of Fort Worth permit fees where applicable, and 1-year workmanship warranty. Westover Hills, Rivercrest, and luxury custom work sits at the high end; Stockyards, North Side, and Burleson tract housing at the low end.
| Job | Total cost | Labor hours | Notes |
|---|---|---|---|
| Outlet or switch installation (existing circuit) | $140-$300 | 1-2 | +$60-$120 in plaster (Fairmount, Ryan Place) |
| Ceiling fan installation (with existing box) | $175-$375 | 1.5-2.5 | +$120-$260 if new fan-rated box and bracing required |
| Dedicated 240V circuit (oven, dryer, EV) | $475-$1,150 | 4-8 | Permit $75-$180, panel space required |
| Level 2 EV-charger install | $750-$1,950 | 5-9 | Oncor and REP rebates eligible if permitted and inspected |
| Pool pump or pool heater dedicated circuit | $575-$1,250 | 4-7 | Bonding required, GFCI breaker, weather-rated disconnect |
| Main panel upgrade (100A to 200A) | $2,000-$3,800 | 8-12 | Oncor service-drop coordination 2-5 weeks |
| Aluminum branch-wiring remediation (CO/ALR or pigtail) | $2,500-$8,000 | 12-40 | 1970s-80s Wedgwood, Hulen, Arlington tract |
| Knob-and-tube / cloth-wire full rewire | $9,000-$22,000 | 60-140 | 1910s-30s Fairmount, Ryan Place, Mistletoe Heights |
| Whole-home standby generator (transfer switch + electrical) | $7,500-$20,000 | 18-32 | Generac, Kohler, or Briggs 22kW typical; gas tie-in required |
| Solar + Powerwall electrical tie-in | $1,700-$4,300 | 10-20 | Excludes panels and battery; Oncor interconnect included |
| Hail / tornado electrical damage repair (mast, weatherhead, meter base) | $1,100-$4,300 | 6-14 | Common after May-July storm events; insurance claim path |
Backup generator, knob-and-tube rewire, and aluminum-wiring jobs deserve callouts. Whole-home generator installs became mainstream after the February 2021 Uri freeze and ERCOT grid failure that left an estimated 4 million Texans without power; Generac, Kohler, and Briggs standby sales jumped 200-400% across the Fort Worth market and have settled into a permanently elevated baseline. Fairmount, Ryan Place, and Mistletoe Heights still hold thousands of 1910s-30s craftsman bungalows with original knob-and-tube and cloth-jacketed wiring, and the rewire is the single most common reason a historic-district sale falls through after inspection. Aluminum branch wiring is the equivalent issue in 1970s-80s Wedgwood and Hulen tract. All three jobs reward a TDLR-licensed contractor who has done dozens recently.
How to Get and Compare Fort Worth Electrician Quotes
Three things separate a useful quote from a useless one in Fort Worth, and they all come down to specificity.
-
Tell the electrician the building age, panel size, and city or suburb. “1925 Fairmount craftsman, 60A fuse panel, City of Fort Worth historic overlay, needs a 200A upgrade and full rewire” gets a different number than “2020 Trophy Club custom, 200A panel with six open slots, needs a Level 2 EV charger and a pool-pump circuit.” Electricians price off panel headroom, remediation risk, suburb-specific permitting, and Oncor queue, so a specific brief beats a generic email.
-
Ask for an itemized written estimate that breaks out labor hours, materials with brand names (Square D vs. Eaton, Tesla Wall Connector vs. Wallbox vs. ChargePoint, Generac vs. Kohler vs. Briggs), permit fees, Oncor coordination time, and patching scope. Verbal estimates grow on the day. Reputable Fort Worth contractors email itemized PDFs within 24-48 hours of the site visit. If a contractor will not put it in writing, walk.
-
Verify the TDLR license, bond, and insurance before you book. Pull the Master Electrician, Journeyman, and Electrical Contractor license numbers from the TDLR public license search and confirm they are active and tied to the same company. Then request a Certificate of Insurance showing $1M general liability and current workers’ comp. Both checks take five minutes and rule out the door-to-door storm chasers who appear after every Tarrant County hail or tornado event.
How We Calculated These Prices
The Fort Worth electrician hourly rate of $60-$105 starts with the BLS Occupational Employment and Wage Statistics median wage for electricians in the Dallas-Fort Worth-Arlington metro: $31.20 as of May 2024. We apply a 1.5x-2.5x consumer multiplier covering business overhead, TDLR licensing, $1M general liability, vehicle costs, employer-paid taxes, workers’ comp at trade rates, and contractor profit, calibrated against current quotes from TDLR-licensed Electrical Contractors across Tarrant County.
Neighborhood-level adjustments reflect access logistics (Westover Hills town review, gated communities, suburban permitting in Keller and Southlake), building-stock differences (knob-and-tube in 1920s Fairmount, FPE in 1950s Crestwood, aluminum in 1980s Wedgwood, 200-400A copper in modern Trophy Club), Oncor service-drop and interconnect timelines, and the post-2021 Uri freeze backup-generator market that has not fully cooled. The full formula lives on our methodology page.
Other Fort Worth Service Costs You Might Need
Electrical rarely happens in isolation. A panel upgrade often pulls in an HVAC tech for a new condenser circuit, a roofer for mast repair after a hailstorm, or a solar installer for re-interconnection, and parallel quotes beat serial calls.
- Fort Worth plumber costs — for water-heater electrical, slab leak coordination, and tankless gas-line tie-ins
- Fort Worth HVAC technician costs — for new condenser circuits, mini-split installs, and heat-pump conversions tied to a panel upgrade
- Fort Worth solar costs — for panels, Powerwalls, and Oncor interconnect on the same project
- Fort Worth roofer costs — for mast, weatherhead, and meter-base repair after May-July hail and tornado damage
- Fort Worth general contractor costs — when the project crosses 3+ trades and needs a single permit filing
- Fort Worth handyman costs — for sub-license fixture swaps, dimmers, and ceiling-fan changes