Pricing by neighborhood — Roofer · Fort Worth, TX
| Neighborhood | Low | High | Why the price moves |
|---|---|---|---|
| Westover Hills / Rivercrest / Westcliff | $65 | $110 | Estate homes with Mediterranean clay tile and slate, premium underlayment, careful gutter and copper-flashing work |
| Cultural District / TCU / Berkeley | $55 | $90 | Premium architectural shingles and Class 4 impact, careful interior protection near Kimbell and Modern Art Museum |
| Fairmount / Ryan Place / Mistletoe Heights | $50 | $80 | 1920s historic, steeper pitch, full tear-off to deck, original shiplap decking common, slower architectural installs |
| Arlington Heights / Crestwood | $45 | $75 | 1950s-60s ranch with shallow pitch, mid-tier architectural, frequent hail-claim replacements |
| Stockyards / North Side | $40 | $65 | Working-class historic, value-tier 3-tab to mid-architectural, frequent partial repairs |
| Southside / Near Southside | $45 | $75 | Gentrifying corridor near Magnolia Avenue, mid-tier architectural, mixed historic and infill stock |
| Keller / Southlake / Trophy Club | $55 | $90 | North suburbs, premium architectural and standing-seam metal accents, HOA shingle-color approval common |
| Burleson / Crowley | $38 | $60 | South suburbs, value-tier 3-tab and basic architectural on slab tract homes, lowest travel premiums |
Roofer hourly rate by neighborhood in Fort Worth, TX. Ranges reflect typical contractor pricing including travel time, building-type access, and local labor density.
How much does a roofer cost in Fort Worth?
Fort Worth roofers charge $30-$50 per hour for scheduled work, with an average of $40/hr. Most roofing is billed by the square rather than the hour: $350-$700 per square (100 sq ft) for architectural asphalt, $900-$1,500 per square for standing-seam metal or clay tile. Neighborhood matters: Westover Hills, Rivercrest, and Cultural District work sits at the top of the range because of tile and slate, premium underlayment, and careful interior protection. Stockyards, Burleson, and Crowley tract work sits at the bottom.
The Bureau of Labor Statistics reports the median hourly wage for roofers in the Dallas-Fort Worth-Arlington metro at $22.85, which the local Fort Worth market discounts roughly 12% relative to Dallas because of lower commercial real estate, insurance, and operating overhead. The gap between the wage and the $40/hr you actually pay is real and explainable, and the rest of this article walks through where every dollar goes, what permits you actually need, and what to ask when comparing quotes after a hail event.
Fort Worth Roofer Rates by Neighborhood
Fort Worth is not one roofing market. A Westover Hills estate with clay tile, copper valleys, and a town-specific inspection office is a different job than a 1925 Fairmount craftsman with steep pitch and original 1x6 shiplap decking, and both are different from a 2018 Trophy Club two-story with prefab trusses and an HOA-approved architectural shingle. The full per-neighborhood breakdown sits at the top of this page; this section explains the why behind the numbers.
The premium for Westover Hills, Rivercrest, and Cultural District work is not arbitrary. Mediterranean tile and slate require tile-saw and lift equipment most asphalt crews do not own. Cultural District work near the Kimbell and Modern Art Museum corridor requires careful interior and landscape protection. Fairmount and Ryan Place historic homes have steep pitches (often 10/12 to 12/12) and shiplap decking that frequently needs partial sheathing replacement once the old roof comes off, both of which slow the install.
Comparable cities for cross-reference:
- Dallas roofer costs — $34-$56/hr
- Houston roofer costs — $33-$55/hr
- San Antonio roofer costs — $31-$52/hr
- Oklahoma City roofer costs — $30-$50/hr
Fort Worth sits roughly 8-12% below Dallas inside the same DFW labor market, mostly explained by lower commercial overhead and a smaller share of luxury custom and high-rise work. It runs at parity with Oklahoma City and a touch above San Antonio because the Tarrant County hail belt drives steadier replacement volume than Bexar County.
Fort Worth Roofer Pricing by Building Type
Neighborhood is one axis. Building type is the other, and it often matters more than the zip code. A 1925 Fairmount craftsman with steep pitch, shiplap decking, and original cedar-shingle layers underneath costs more to tear off and replace than a 2018 Keller two-story with prefab trusses, code-current decking, and a single architectural-shingle layer.
| Building type | Cost per square installed | Why the price moves |
|---|---|---|
| Luxury custom tile or slate (Westover Hills, Rivercrest, Westcliff) | $1,000-$3,500 | Mediterranean clay tile or slate, copper or zinc flashing, lift equipment, town-specific permits, finish protection |
| 1920s historic with shiplap (Fairmount, Ryan Place, Mistletoe Heights) | $475-$800 | Steep pitch, partial deck sheathing replacement, multi-layer tear-off, architectural or Class 4 shingle |
| 1950s-60s ranch (Arlington Heights, Crestwood, Wedgwood) | $400-$650 | Shallow pitch, single-layer tear-off, hail-claim replacement cycle, architectural shingle |
| 1970s-90s tract (Hulen, Ridglea, southwest Fort Worth) | $375-$575 | Standard pitch, OSB decking, architectural shingle, straightforward access |
| Modern HOA suburb (Keller, Southlake, Trophy Club) | $475-$750 | HOA-approved Class 4 architectural or standing-seam accents, code-current decking |
| Value tract (Burleson, Crowley, south Tarrant County) | $350-$525 | Slab on grade, single-layer 3-tab or basic architectural, lowest travel premiums |
The Class 4 question is the single biggest dollar decision Fort Worth homeowners make on a replacement. Class 4 impact-resistant shingles cost $1,200-$3,000 more than standard architectural on a typical 2,000 sq ft home, and most Texas homeowners insurance carriers (State Farm, Allstate, Farmers, USAA) offer a 15-30% wind-and-hail premium discount for Class 4. On a $2,400/yr policy that is $360-$720/yr back, which pays the upgrade off in 4-8 years and earns from there.
What Your Billed Hour Actually Covers
The $22.85 metro BLS wage (adjusted down to roughly $20.00 for Fort Worth’s lower operating cost) is take-home pay for the roofer, not what the customer pays. The customer rate of $30-$50/hr covers everything the business needs to legally operate in Tarrant County.
Roughly: 50% labor, 13% commercial liability and bonding insurance ($12,000-$22,000/yr per crew in Fort Worth because roofing carries among the highest workers comp claim rates of any trade), 10% vehicle and specialty tools (truck-mounted ladder rack, conveyor lift for shingle delivery, tile saw and lift for premium-tier work, magnetic sweep for nail cleanup), 10% Texas-specific licensing and overhead (RCAT certification, City of Fort Worth contractor registration, Tarrant County and suburban-municipality registrations, dispatch and storm-claim coordination), and 17% contractor profit margin. Strip any of those out and the business cannot stay open.
This is why the cheapest quote is not always the right one. A Fort Worth roofer bidding $250 per square on architectural asphalt is either operating without insurance (your homeowner’s policy will not cover a worker injury on your roof), without RCAT certification or a local business address (which means the warranty may not be enforceable if the crew disappears after one storm season), or losing money to win the job and about to disappear mid-project. The post-2024 hail-belt cycle has seen waves of out-of-state crews who priced below local rates and were gone by the next May.
Fort Worth Roofer Permits and What They Cost
Texas does not require a state roofer license, and the City of Fort Worth does not require a city-issued roofer license either. What it does require is a permit for any roof replacement above $5,000 in value or any work that touches structural framing. The City of Fort Worth Development Services Department handles permits inside city limits; Tarrant County covers unincorporated areas; Keller, Southlake, Trophy Club, Burleson, and Westover Hills operate separate offices with similar fee schedules. Skipping the permit is the most common way Fort Worth homeowners turn a $15,000 reroof into a $25,000 problem at resale when the home inspector flags the unpermitted work.
| Work | Permit | Typical cost | Lead time |
|---|---|---|---|
| Full roof replacement (>$5,000) | Fort Worth building permit | $90-$240 | 3-7 business days |
| Reroof with structural framing change | Building + framing inspection | $180-$420 | 1-2 weeks |
| Skylight or new vent penetration | Building permit | $80-$180 | 3-5 business days |
| HOA architectural approval (Keller, Southlake, Trophy Club) | HOA-specific | $0-$150 | 2-4 weeks |
| Westover Hills town permit | Town inspection office | $120-$280 | 1-2 weeks |
Your roofer files the City of Fort Worth or county permit on your behalf and the fee gets added to the invoice. RCAT (Roofing Contractors Association of Texas) certification is the realistic floor for a Fort Worth roofer to be taken seriously; it is voluntary but signals manufacturer-approved installer training, ongoing continuing education, and a Texas business presence. Suburban municipalities sometimes require a separate local contractor registration on top of RCAT; Keller, Southlake, Trophy Club, and Westover Hills all maintain approved-contractor lists. For larger projects involving multiple trades, expect to coordinate the roof permit with a Fort Worth general contractor who handles the full filing.
Common Roofer Job Pricing in Fort Worth
These are typical all-in prices, including labor, materials, Fort Worth-specific permit fees where applicable, tear-off and disposal, and the manufacturer plus workmanship warranty. Westover Hills, Rivercrest, and Cultural District work sits at the high end of each range; Stockyards, Burleson, and Crowley at the low end.
| Job | Total cost | Crew days | Notes |
|---|---|---|---|
| Architectural shingle reroof (1,800-2,400 sq ft) | $9,500-$22,000 | 1-2 | GAF Timberline, Owens Corning Duration, CertainTeed Landmark dominate |
| Class 4 impact-resistant shingle reroof | $14,000-$30,000 | 1-2 | $1,200-$3,000 premium over standard architectural; 15-30% insurance discount |
| Standing-seam metal roof | $28,000-$60,000 | 3-5 | 24 or 26 gauge Galvalume, painted Kynar finish, 40-60 year lifespan |
| Clay or concrete tile (Westover Hills, Trophy Club) | $30,000-$70,000 | 4-7 | Mediterranean estate aesthetic, 50-100 year lifespan, requires tile-saw and lift |
| Slate reroof (Rivercrest, Westover Hills) | $60,000-$140,000 | 5-10 | Real slate; synthetic alternatives run 30-40% less |
| 4-6 shingle hail-spot repair | $250-$500 | 1 day part | Color match degrades after 5+ years |
| Single roof leak diagnosis + repair | $300-$750 | 1 day part | Attic inspection, flashing or vent boot replacement |
| Ridge vent + soffit vent system | $1,200-$2,800 | 1 | Critical in Tarrant County humidity, often added during reroof |
| Gutter coordination during reroof | $1,400-$3,200 | 1 | $8-$12 per linear foot in-line vs $12-$18 standalone later |
| Full deck replacement (per OSB sheet) | $65-$95 per sheet | 0.5-2 | Common in 1920s Fairmount once shiplap is exposed |
Hail damage drives the Tarrant County replacement cycle and deserves a callout. Major hail events in May, June, and early July routinely cycle 30-50% of the local roofing market through replacement in a single season. Insurance carriers settle most claims at full replacement cost minus depreciation, with the depreciation released as recoverable on completion. Tanglewood, Wedgwood, Crestwood, and Arlington Heights tract neighborhoods see the highest claim density because shallow pitches expose more shingle surface area to falling hail. Class 4 impact shingles cut hail claim severity significantly and earn the insurance premium discount, which is why most Fort Worth replacements done since 2023 spec Class 4.
How to Get and Compare Fort Worth Roofer Quotes
Three things separate a useful quote from a useless one in Fort Worth, and they all come down to specificity, especially after a hail event when the local market is saturated.
-
Tell the roofer the home age, pitch, square footage, and existing roof material. “1925 Fairmount craftsman, 10/12 pitch, 1,800 sq ft, two layers of architectural plus original cedar underneath, shiplap decking” gets a different number than “2018 Keller two-story, 5/12 pitch, 2,400 sq ft, single layer architectural, OSB decking.” Roofers price the job partly off what they expect to find once the old roof comes off, so vague briefs produce wider, less useful estimates.
-
Ask for an itemized written estimate that breaks out tear-off and disposal, decking allowance ($65-$95 per OSB sheet if needed once exposed), underlayment type (synthetic vs felt), ice and water shield in valleys, drip edge, ridge vent and pipe boots, flashing material (galvanized vs aluminum vs copper), shingle brand and product line, warranty terms (manufacturer plus separate workmanship), and permit fees. Verbal estimates are not enforceable and tend to grow on the day. Reputable Fort Worth roofing companies email itemized PDFs within 24-48 hours of the site visit. If a roofer will not put it in writing, walk.
-
Verify RCAT certification, insurance, and local presence before you sign. Pull the company name from the RCAT directory, request a current Certificate of Insurance showing $1M general liability minimum plus active workers comp, and confirm a Fort Worth or Tarrant County business address and phone number. Check the Texas Department of Insurance complaint database. All three checks take 10 minutes and rule out 90% of the storm-chasers who flood the market every May. Door-to-door solicitation after a storm is still a red flag in this market.
How We Calculated These Prices
The Fort Worth roofer hourly rate of $30-$50 starts with the BLS Occupational Employment and Wage Statistics median hourly wage for roofers in the Dallas-Fort Worth-Arlington metropolitan statistical area: $22.85 as of May 2024. We discount roughly 12% to $20.00 for Fort Worth’s lower cost of living and commercial overhead relative to Dallas, then apply a 1.5x-2.5x consumer multiplier covering business overhead, insurance, vehicle costs, employer-paid taxes, workers comp (among the highest of any trade), and contractor profit margin, calibrated against current per-square quote ranges from RCAT-certified Tarrant County roofers.
Neighborhood-level adjustments reflect material mix (Mediterranean tile and slate in Westover Hills, Rivercrest, and Westcliff; premium architectural and Class 4 in Cultural District, TCU, and Keller; steep-pitch 1920s historic work in Fairmount, Ryan Place, and Mistletoe Heights; shallow-pitch ranch in Arlington Heights and Crestwood; value-tier tract in Burleson and Crowley), access logistics (Westover Hills town inspection office, HOA architectural approvals in Trophy Club and Southlake), and the Tarrant County hail-belt replacement cycle that runs at 30-50% claim density in major storm seasons. The full formula and source list lives on our methodology page.
Other Fort Worth Service Costs You Might Need
Roofing rarely happens in isolation. A full reroof typically pulls in 2-3 adjacent trades, and getting quotes from all of them at the same time is faster than serial calls.
- Fort Worth gutter installation costs — best coordinated during the reroof at $8-$12 per linear foot rather than later at $12-$18
- Fort Worth general contractor costs — when the project crosses into structural framing, dormers, or skylight additions
- Fort Worth HVAC technician costs — for attic ventilation coordination and condenser disconnect during tear-off
- Fort Worth carpenter costs — for fascia, soffit, and dormer woodwork exposed during the reroof
- Fort Worth handyman costs — for small post-reroof items like satellite-dish reinstall and exterior paint touch-up